Raspberry Pi 2.5" SATA HDD/SSD Storage Expansion Board, X820 V3.0 USB 3.0 Mobile Hard Disk Module for Raspberry Pi 3 Model B+/3B

Package Includes:

1 x X820 V3.0 Expansion Board

1 x USB 3.0 Cable (Length: 60cm/ 23.62 inch)

1 x USB to Micro USB Power Cable(Length:14.5cm/5.71inch)

1 x USB Connector

1 x 2-Pin Power Connection Wire (Cable: 10cm/3.93inch)

1 x Pack of Installation Screws​

Please note:

The raspberry pi and the 2.5" SATA are both not included.

For 3.5 inch HDD hard disk drive x830 expansion board, please refer to X830 3.5" HDD Expansion Board.

What do you need to get Raspberry Pi X820 V3.0 2.5 inch SATA Storage Board working?

 (1) A Raspberry Pi board(Raspberry Pi 3 B+, 3B, 2B, B+)

(2) A DC 5V 4A Power Supply (optional)

(3) A 2.5 inch SATA hard disk drives (HDD) or solid-state drive (SSD) (Up to 4TB)

(4) A X820 V3.0 board matching metal case kit (optional)

Note:

when using our case, the Max. compatible thickness of the 2.5" SATA SSD/HDD is 10.4mm/0.41inch. (The standerd 2.5" SATA SSD/HDD is 9.2mm/0.36inch)

Only 2.5 inch SATA interface HDD/SSD hard disk is suitable for X820 Board

Overview:

The X820 V3.0 SATA HDD/SSD expansion board (Updated Version of X820 V1.3) provides an complete storage solution for Raspberry Pi, it supports up to 4TB 2.5-inch SATA hard disk drives (HDD) / solid-state drive (SSD). Furthermore, this X820 V3.0 Board has other powerful function: such as USB booting from your HDD/SSD('reboot' command is supported), USB 3.0 Mobile Hard Disk function with high-speed USB 3.0 connectivity from a PC or a Mac, Powers the Raspberry Pi with On-board XH2.54 connector and USB power socket to power other devices and so on.

For Use With:

Raspberry Pi 1 Model B+/ Raspberry Pi 2 Model B / Raspberry Pi 3 Model B / Raspberry Pi 3 Model B+(Plus)​

Rock64(same dimesion as the raspberry pi)

PC / Mac

Tinker Board

​Operating System:

All Raspberry Pi operating systems

Features:

Supports up to 4TB 2.5-inch SATA hard disk drives (HDD) / solid-state drive (SSD)

Supports USB booting from your HDD/SSD

On-board push button to control power on /off (Press-ON, Hold the button pressed at least 2s -OFF)

Powers the Raspberry Pi via Pi's 40-pin header or Micro USB socket

On-board XH2.54 connector and USB power socket to power other devices

Ideal storage solution for Raspberry Pi

USB 3.1 Gen1 to SATA 6Gb/s bridge controller

USB 2.0 connectivity offers plug-and-play functionality on your Raspberry Pi

Quick file transfer with high-speed USB 3.0 connectivity from a PC or a Mac

External Self-Powered or USB bus-powered

LED red indicator indicates powered status and blue indicator indicates drive status

Easy DIY with Raspberry Pi​

Specificaiton:

- Power supply: 5Vdc +/-5% , 4A

- Ports & Connectors:

DC jack - 5.5x2.5mm, USB socket - USB 3.0 type A

Power output connector - XH2.54 2-pin

Power switch connector -PH2.0 4-pin

- PCB Size 107.5mm x 85mm

​[Power Supply Unit: (Optional Accessories)]

Official DC 5V 4A power supply:

AC 100 - 240V input ~50 / 60Hz, 5Vdc 4A output

DC Power Plug Size : 5.5*2.5mm

DIY DC 5V 4A power supply:

AC/DC ADAPTER

Interface: DC 5.5x2.5 mm

Input: AC 100V - 240V,~50 / 60Hz;

Output: DC 5V Max.4A;

Note:

​Please use X820 V3.0 board with a good quality power supply. The power adapter powers not only the Raspberry Pi , but also the SSD/HDD. If the power is low, the SSD/HDD may not be identified.